Bathroom remodel plumbing is where precision and code knowledge separate a solid project from one that fails inspection or leaks within months. In Odessa's hot, arid climate—where water is precious and dust storms can complicate site conditions—getting the rough-in right the first time matters. We handle the full scope: water supply sizing, drain and vent stack layout, pressure-rated connections, and fixture trim-out. Whether you're reconfiguring a bathroom in Downtown Odessa, expanding in West Odessa, or upgrading near the Parks, we coordinate with your general contractor, frame the plumbing before drywall, pressure-test to local code, and finish with leak-free fixture connections. We read blueprints, account for existing walls and joists, and adapt when hidden conditions emerge—the reality of remodeling work.
The rough-in phase is critical: water supply lines must be sized for demand without pressure loss, drains must slope correctly (1/4 inch per foot minimum), and vent stacks must reach above the roof unobstructed. We use approved materials—PEX for supply lines where code allows, Schedule 40 DWV for drains—and we test every connection before walls close. In Ector County, rough-ins must pass inspection before drywall, so we coordinate timing with inspectors and ensure documentation is ready. Dust and heat can degrade fittings if work is exposed too long; we protect connections and manage site logistics to keep your project on track.
Fixture trim-out—the final connections to toilet flanges, sink faucets, and shower valves—requires precision and finesse. Overtightening cracks porcelain; undertightening leaks behind walls. We install shut-off valves at each fixture for future maintenance, use proper sealants and tape, and pressure-test after connections. In a remodel, we often work around existing framing and cabinets; sometimes we relocate supply or drain lines to meet new fixture placement. This flexibility, combined with clean workmanship, keeps your remodel looking professional and functioning without callbacks.
We're based at 1652–1698 Whitaker Ave and available Mon–Fri 8am–6pm and Sat 9am–2pm. If your remodel is delayed or unforeseen plumbing issues emerge during demolition, we adapt scheduling to keep your project moving. Our goal is reliable, inspectable work that your GC and final walk-through inspector approve without hesitation.
Bathroom Remodel Plumbing Services We Offer
✓Bathroom Fixture Rough-In & Installation
Complete water supply and drain preparation for toilet, sink, shower, and bathtub. We size and route lines per code, pressure-test, and prepare trim-out connection points.
✓Shower Valve & Trim-Out Installation
Rough-in and finish installation of shower valves, mixing cartridges, and trim rings. Includes supply line routing, pressure testing, and final faucet or diverter hookup.
✓Drain & Vent Stack Rough-In
New drain and vent stack layout and installation for remodeled or new bathroom spaces. Ensures proper slope, venting above roof, and code-compliant connections.
✓Toilet Flange Repair & Replacement
Flange reinstallation or replacement to eliminate leaks, uneven seating, or code violations. Includes wax ring or gasket installation and final bolting.
✓ADA Accessible Bathroom Plumbing
Grab bar backing installation, lever-handle faucet rough-in, and accessible drain routing. Meets ADA standards for height, clearance, and safety compliance.
✓Water Supply Line Relocation
Reroute hot and cold supply lines to new fixture locations. We size lines for demand, use approved materials, and ensure no pressure loss or cross-contamination.
✓Bathtub & Shower Pan Plumbing
Rough-in drain and overflow lines for tub or shower pan installation. Includes vent routing, trap placement, and pressure testing before pan setting.
✓Vanity & Sink Rough-In Prep
Supply and drain line routing for pedestal, wall-mounted, or cabinet sink installations. We prepare connection points and ensure adequate clearance for future trim-out.
Bathroom Remodel Plumbing Cost in Odessa, TX
| Service | Typical Range | What Affects It |
|---|---|---|
| Basic Fixture Rough-In (single fixture—toilet, sink, or tub) | $200–$400 | Simple routing, existing walls, no new vent required. Price increases if relocation or new vent stack needed. |
| Full Bathroom Rough-In (new space or major remodel) | $1,000–$2,000 | Supply, drain, and vent layout for multiple fixtures. Varies with square footage, complexity, and site access. |
| Shower Valve & Trim-Out Installation | $250–$500 | Rough-in supply line, valve installation, and trim-out with final faucet. Custom showers or multiple valves run higher. |
| Drain Line Reroute (single line) | $300–$800 | Depends on distance, wall access, and whether existing line must be capped or abandoned. |
| Toilet Flange Repair/Replacement | $100–$250 | Simple replacement lower end; removal of old flange, debris cleanup, or structural reinforcement push higher. |
| Vanity & Multi-Fixture Trim-Out | $500–$1,200 | Sink faucet, supply valve shutoffs, and drain finish for cabinet installation. Fixture quality and finish kit affect price. |
Ranges are typical for Odessa, TX and confirmed with an exact written quote before any work starts.
How it works
- 1
Site Assessment & Code Review
We review your remodel plans, verify Ector County code requirements, and walk the existing space. We identify structural constraints, existing lines to protect or relocate, and optimal routing for new supply and drain. This step prevents costly mid-project changes and ensures the rough-in passes inspection on the first review.
- 2
Rough-In Layout & Installation
We lay out water supply lines (sizing for fixture demand), install drain and vent stacks (ensuring proper slope and venting), and secure all components per code. We use approved materials—PEX, copper, or PVC as appropriate—and account for Odessa's dust and heat by protecting exposed fittings and scheduling around site conditions.
- 3
Pressure Testing & Inspection Prep
We pressure-test all supply lines at 80 psi for 15 minutes to confirm no leaks. We prepare documentation and coordinate with the local inspector, ensuring the rough-in is ready for walk-through before drywall closes. This step catches issues early and keeps your schedule on track.
- 4
Fixture Trim-Out & Final Connections
Once walls are open, we install shut-off valves, connect fixture supply lines, set toilet flanges, and trim out shower valves and faucets. We test all connections under pressure and verify proper flow and drainage before finishing. Clean, precise work here prevents future leaks and callbacks.
- 5
Final Inspection & Walkthrough
We attend final inspection with your GC and provide any certification or documentation required. We verify all fixtures drain and supply properly, check for any new issues, and address minor adjustments on the spot.
Pricing
Bathroom remodel plumbing is a mid-range service—not budget work, but not high-end custom pricing. Rough-in and trim-out labor, materials, and inspection coordination are the main drivers. We provide honest quotes based on scope and site conditions; no surprises.